2GNT Logo

Member Login Username:


Crankshaft Position Sensor O-Ring Replacement

O-Ring measurements:

16mm ID
1.75mm thick
19.7mm OD

When finding a generic replacement, the measurements do not have to be
but they should be as close as possible. Also, Viton is a preferable material to Buna-N or Nitrile.

McMaster-Carr has a suitable replacement - part #9263K181. Available in packs of 25 however. You might also try your local hardware store or Harbor Freight for a multi-pack of o-rings.

Document statistics: Last modified on 2011-08-09 14:09:38 by CODE4

Back | Home

Wiki engine and all content (C) 1998-2021 2GNT.com unless otherwise noted