· ECU modsa place for Dino to keep track of the ECU mods he's writing Everything documented here is intended to be used with the SBEC3 table editor ∟Knock CEL take 1:(does not work)Edit 0xAD0B, Type B, Hex change:
to
Then edit 0xAD0B, Type B, Hex Change:
to
∟Remove '98 - '99 fuel cut:(for 05293190AC)0x2DB11, Type B, Hex, 0xFA 0x02 0x41 0xAA 0xB0 0x08-> 0x29 0x40 0x0C 0x30 0x27 0x4C 0x2daee, Type B, Hex, 0x6E -> 0xFF 0x21f0b, Type B, Hex, 0x6D 0x60-> 0x2E 0xE0 0x21F21, Type B, Hex, 0cB4 0x14 -> 0x27 0x4C ∟Disable EGR0x0332, type B, Hex: 0x08 -> 0x00 ∟Scaling injectorsThis used the returnless fuel system vacuum multiplier prescaler 0x0B9E, Type C, Decimal  0 is atmosphere This got 30lb/hr injectors @ 40psi idle pressure to idle with no LTFT. ∟Misc0x2D44C, Table Type B, Hex, 0x28 -> 0x29 open loop forever 0x2D440, Type B, Hex, 0x72 -> 0x75 use adjusted TPS instead of raw TPS for open loop 0x20A3E, Type B, Hex, 0xFF -> 0x00 force all OBD2 monitors to Ready 0x2d432, Type B, Hex: 0xD0 is the WOT / Open Loop transition value |
| Document statistics: Last modified on 2022-12-05 17:39:20 by DarkOne |